Yep. CNC machines of sufficient accuracy/precision are considered export-controlled munitions because they can be used to manufacture nuclear weapons components or nuclear fuel processing equipment, such as gas centrifuges).
Their sale/ownership are registered with the government. Some of them have GPS chipsets or are otherwise set up to detect when they're being moved, and stop functioning to some degree until they're recommissioned by the manufacturer - though this is also abused by manufacturers to force a company to have to pay to re-commission a machine if it is re-sold, even if it doesn't qualify under munitions rules.
Other things that are sometimes export-restricted include components that could be used in missiles like accelerometers, inertial navigation units and GPS chipsets if they're the sort that have sufficient accuracy or lack speed/acceleration/altitude lockouts.
> Yep. CNC machines of sufficient accuracy/precision are considered export-controlled munitions because they can be used to manufacture nuclear weapons components or nuclear fuel processing equipment, such as gas centrifuges).
> Yep. CNC machines of sufficient accuracy/precision are considered export-controlled munitions because they can be used to manufacture nuclear weapons components or nuclear fuel processing equipment, such as gas centrifuges).
> stop functioning to some degree until they're recommissioned by the manufacturer - though this is also abused by manufacturers to force a company to have to pay to re-commission a machine if it is re-sold
I imagine that moving a machine with a resolution in the realm of nanometers might affect it's performance if not done perfectly or jostled too much in transport (they have special postuments built for them in the place they will sit and are calibrated once settled in place). If I was a new owner of such a machine, I would order manufacturer checkout anyway.
I worked for a company that made nanometer precise stages and robotic hardware for the semiconductor, microscopy and metrology industries. We made stuff that was so precise that we had to pause our testing twice a day when the train would go by 1/4 of a mile away because we'd see the vibration in our tests.
The owner got a "special" deal from our machine tool supplier for a "open box" milling machine. It was normally a 500k 5 axis large volume milling machine with extremely high precision, at least that's what we were told.
After buying it, installing it, andd trying to use our laser interferometer on it we discovered it was not even close to its stated accuracy, and in fact wasn't even as accurate as a basic mill. It couldn't make parts that were worth a damn.
After a bunch of back and forth, it turns out that this specific mill was a trade show demo unit, it had been taken around the country and and setup in conference centers to show. Somewhere along the way it was also crashed (when you accidentally run an axis, or several, into things your not supposed to). They neglected to tell us any of this before we bought it.
The founder/owner of that company was a real piece of work - so I suspect this has more to do with karma than anything.
Dan Gelbart once demoed his workshop and mentioned some Moore jig grinder, where after calibration, loaders had to use aluminized insulating overalls like in metal foundries, because their radiated body heat would affect machine precision.
Their sale/ownership are registered with the government. Some of them have GPS chipsets or are otherwise set up to detect when they're being moved, and stop functioning to some degree until they're recommissioned by the manufacturer - though this is also abused by manufacturers to force a company to have to pay to re-commission a machine if it is re-sold, even if it doesn't qualify under munitions rules.
Other things that are sometimes export-restricted include components that could be used in missiles like accelerometers, inertial navigation units and GPS chipsets if they're the sort that have sufficient accuracy or lack speed/acceleration/altitude lockouts.