I actually did this at one point in time. The hardware you're looking for is a "laser galvo" setup. It typically takes a +/-12v range analog signal as input. I ended up building my own hardware to drive this. You can use a D to A converter and an op-amp to take a digital output from a raspberry pi or arduino and get the correct signal level. I ran mine on an arduino and it was plenty fast for simple things. Complex animations that require more compute on the device might be a bit much. Enabling and disabling the laser is as simple as a transistor.

If you want animation, then DMX-512 is inadequate. You are looking at frame-buffer to beam director(s) conversion. That would be specific to the hardware you have. The systems that I have come across are proprietary and designed to be rented-out out to event organizers.

From the software point of view, perhaps laser projection TV technology might be better suited to what you want to achieve.

> From the software point of view, perhaps laser projection TV technology might be better suited to what you want to achieve.

Laser projection TV is boring. I've got one, and it's more or less the same as any other tv. Hook up an HDMI and go. It doesn't give you a laser light show, even if it is technically laser, light, and a show. Technically they're pretty boring too, they're lcd or dlp projector with a laser instead of an incandescent light source.

The OP clearly wants an x-y servo mirror / galvonometer setup plus some way to modulate the laser. Some people experiment with scanning mirrors in one dimension, but then you end up with a rasterized display and not the smooth curves or a true laser show.