Without details on what you were using, I can't be certain, but this absolutely is not my experience.
I got started in 2017 with an Ender 3, and extremely cheap printer with a basic set of features. I improved it by adding a bed leveling sensor and flashing new firmware, along with adding a tool steel nozzle and heater, and a 3d printed housing replacement for it's screen which included a place to mount a raspberry pi, running octoprint, to manage it remotely, and a webcam on a stick mounted to the Z rail. It worked pretty good, and building it was fun.
However in the intervening years, I also bought a Creality CR-6 Max, a much larger printer with a built-in bed leveler. It too got a pi and a webcam, but nothing beyond that, and it too worked well. However both those printers required constant maintenance, troubleshooting and overall fiddling. It remained my niche hobby.
I've since upgraded to a Bambu Lab H2D at great expense ($3,200 retail, utterly dwarfing the sub-$500 printers of before) and honestly, it's like a different tech all together. I don't even NEED a computer, really, unless I want to use one: I can find stuff on my phone, download it, and send it to the printer over their cloud service. And no troubleshooting really to speak of, I think I've had like 3 prints that did some weird shit and required a figure or two, but absolutely no comparison to the other machines. And in fact it's so bulletproof that my wife, who is utterly uninterested and frankly a bit hostile to tech, now uses it more than I do. She says it's a slightly trickier version of a Cricut, which is just WILD to me coming from my experiences with the Ender and Creality before it.
All of these are of course FDM printers. I have also played with a Photon Mono X I got from a friend who didn't want to use it with their birds in their home, and that one while requiring more fiddling and more chemicals, is also virtually bulletproof with regard to print quality, and you get better finishes with some tradeoffs (vulnerability to sunlight, figuring out curing vs. over-curing, what have you) which sounds a bit more like what you were dealing with. I could absolutely see that souring your opinion if you started there, that's not a beginner machine IMHO.
I got started in 2017 with an Ender 3, and extremely cheap printer with a basic set of features. I improved it by adding a bed leveling sensor and flashing new firmware, along with adding a tool steel nozzle and heater, and a 3d printed housing replacement for it's screen which included a place to mount a raspberry pi, running octoprint, to manage it remotely, and a webcam on a stick mounted to the Z rail. It worked pretty good, and building it was fun.
However in the intervening years, I also bought a Creality CR-6 Max, a much larger printer with a built-in bed leveler. It too got a pi and a webcam, but nothing beyond that, and it too worked well. However both those printers required constant maintenance, troubleshooting and overall fiddling. It remained my niche hobby.
I've since upgraded to a Bambu Lab H2D at great expense ($3,200 retail, utterly dwarfing the sub-$500 printers of before) and honestly, it's like a different tech all together. I don't even NEED a computer, really, unless I want to use one: I can find stuff on my phone, download it, and send it to the printer over their cloud service. And no troubleshooting really to speak of, I think I've had like 3 prints that did some weird shit and required a figure or two, but absolutely no comparison to the other machines. And in fact it's so bulletproof that my wife, who is utterly uninterested and frankly a bit hostile to tech, now uses it more than I do. She says it's a slightly trickier version of a Cricut, which is just WILD to me coming from my experiences with the Ender and Creality before it.
All of these are of course FDM printers. I have also played with a Photon Mono X I got from a friend who didn't want to use it with their birds in their home, and that one while requiring more fiddling and more chemicals, is also virtually bulletproof with regard to print quality, and you get better finishes with some tradeoffs (vulnerability to sunlight, figuring out curing vs. over-curing, what have you) which sounds a bit more like what you were dealing with. I could absolutely see that souring your opinion if you started there, that's not a beginner machine IMHO.